REPAIR MENU KODE FACTORY TELEVISI

MENU SERVICE CODE  
is a code to enter into a state of "SERVICE MODE". In terms of aircraft repair televisiada several ways, including by using the code numbers or letters or a combination of both. Another way is to use a hardware trick by men-short/jumper just at the point / or switch which is served (sharp, panasonic, thomson, phillips, etc.).

Here I will provide some way / code to open the service menu of several brands of televisions which commonly circulate in Indonesia, of course, the plane tv output starting in 2000 until now, because most manufacturers only modify its course.

TOSHIBA: PRESS MUTE IN REMOTE ONCE, THEN AGAIN CLICK AND HOLD MENU + MUTE ON TV. Repeat MENU FOR THE NEXT PUSH-PUSH diremote 4,7,2,5 NUMBERS PRESS VOL (-) IN THE PRESS AND HOLD-TV NUMB 

SANYO: MENU ON REMOTE VOLUME UP TV + 

  

LG FLATRON:
REMOTE IN PRESS OK + OK on TV or the MENU MENU ON REMOTE + TV

 

PHILIPS: standby TV POSITION, PRESS 0, 6, 2, 5, 9, MENU

 

POLYTRON: TV STANDBY POSITION, PRESS AND HOLD MENU ON REMOTE TO TURN ON TV INPUT CODE NUMBERS 1013.

 

PANASONIC: SHORT (connect time) PIN 'FA-1' Kefa-2 'OR TO THE GROUND TP-8 PANASONIC TX SERIES: PRESS VOL (-) + DI TV OSD

 

SHARP: SHORT LEG (PIN) 6 PIN 7 AND a moment in IC MCU (TDA 98XXX). BACK TO EXIT SHORTKAN.

 

Akari: PRESS MENU SLEEP IN REMOTE + TV

 

SAMSUNG: CLICK ON STANDBY REMOTE POSITION: MENU - PTSD - MUTE - POWER ON
SAMSUNG Plano: STANDBY POSITION, CLICK ON REMOTE: DISPLAY-MENU-MUTE-POWER ON
Plano DIGITAL SAMSUNG HD100: STANDBY-DISPLAY-MENU-MUTE-POWER
OR: STANDBY-MUTE-1-8-2-POWER ON

 

JVC: SIMULTANEOUSLY PRESS AND HOLD the MUTE OSD +
PRESS AND HOLD OR PICTURE + OSD.

 

HITACHI: Press and hold the AV IN TV, turn the POWER SWITCH TV.

 

SONY: STANDBY-OSD - 5 - VOL (-) - POWER ON.

RCA / THOMSON: VT PRESS AND HOLD IN BUTTON POWER SWITCH ON TV + TV.
AIWA: serve MENU BUTTON IS IN REMOTE IN THE VOLUME BUTTON (+), unloading NOTICE.
TCL: PRESS DISPLAY (OSD) diremote + VOLUME DOWN ON TV, hold 3 seconds.
CRYSTAL: standby TV POSITION, PRESS VOLUME UP + DOWN VOLIME SIMULTANEOUSLY ON TV AND HOLD ON TV hinga.
AKIRA, FUJITEC, Boomba:
CHINA MARKS AND SOME OTHER TYPE D TO USE THE PROGRAM LC8632XX IC SERIES: PRESS MENU ON REMOTE twice - RECALL (Q.VIEW) - MUTE.
OTHER CHINA TV (KCL, MITOCHIBA, BAZZOMBA) PUSH UP THE VOLUME ON TV ONCE NOL.TEKAN RECCAL IN REMOTE, PRESS AND HOLD VOLUME (-) IN TV SIMULTANEOUSLY WITH PUSH BACK IN REMOTE RECALL .. repeated the process to enter the sub menu next to exit the service menu.

Some brands also have a TV CHINA serve menu button on the remote orsinilnya.