MAINTENANCE CABINET ES & REPAIR

 Placement of a Refrigerator,  unconsciously less we notice. Many people specify the placement of the refrigerator just because of the beauty of the room without regard to other aspects. Appropriate placement of the refrigerator will benefit the durability of the engine coolant for cooling the engine will not work hard and will certainly save on electricity consumption. Here we provide some tips on placement Refrigerators, Refrigerator, Refrigerator:Do not be installed in a hot area.
          If the room temperature is too high, ie near the stove or the sun is directly exposed to the cooling capacity of the refrigerator / freezer / refrigerator will deteriorate and the cost of electricity consumption will increase as will the refrigerator compressor work harder.

Place on a sturdy floor and flat.
           Unstable installation may cause vibration, noise in the fridge. If the floor is not flat, then flatten the fridge / freezer / refrigerator using the leveling screws. If the fridge is installed on carpeting or wood flooring, carpet and wood will melt or burn by heat generated underneath. In this case, enter the mat or other material between the floor and refrigerator. The position of the front / side door should be slightly raised to turn the screw by turning counter-clockwise to help, close the security door. If the back side is removed, then the door will not be closed tightly.Place in a low humidity.
           Do not put engine coolant in damp and wet places. Because moisture can cause rust and Short Circuit in the engine coolant.Give the distance between the wall and the fridge.
          Leave a space between the walls in accordance with the Fridge, a minimum distance of 30cm and above, at least 2cm either side, and backward at least 5cm from the wall. If the distance is too close can damage the cooling capacity of the fridge and the increasing cost of electricity for the refrigerator will work harder.