ELECTRONIC WORLD EXPERIENCE

EXPERIENCE REPAIR TV DAMAGE BLOCK REGULATOR 
Total dead> How to check the regulator block1. In light pairs Boklap 40W Voltage 115VDC B +2. Remove the first line to another voltage (Released from Elco Line Voltage)3. If the TV is turned on the house Down Thermal Transistor Regulator continues to mean short-circuit damage.4. Turn and Measure Voltage with its Multitester5. If light is life so Transitor Regulator Damage / her Driver Transistor Transistor and check one by one her Diodes originally code number 86. If the On light 115DCV But Tagangan No maximum damage to the diode Ziner 6.2V Oscillator and its transisitor7. Once the voltage is normal 115VDC start we put the burden on the voltage the other one by one, after Normal New Start us off the lights boklam her and do not forget after the lights boklam off pairs of load B + it because if the lamp is removed and the burden of B + is not in pairs so would cause the destruction of Transistor Regulator. how to repair the regulator block must be true - really thorough.

Then I will proceed to:

HOW TO READ CODE BLOCK VERTICAL IN TV CIRCUITS
VERTICAL BLOCK REPAIR EXPERIENCE

Vertical code read something about the way >  we see on tv series, we sort yoge 4 wire line cable (2 cables Got a horizontal block, two blocks have a Vertical Cable) up to component and then we see that the component code examples from the cable line there yoge visible components and Elco At Elco C501 code means a code number in the starting five all have a vertical block.see example image below:

The damage often occurs:

• A. Horizontal straight lines tv

     Damage> Damage is usually the vertical IC, first check if the voltage is 24VDC Voltage Release Droup try to track his leg ic if the new 24VDC Voltage Normal kerukan we can determine the vertical IC, usually also can damage the dry Elco On Vertical Block. So I suggest to people if we will try to fix the vertical block All Elco we substitute a new one due to his cause because of the work elco matio IC is not optimal it will generate heat in the vertical IC Ic and If we Replace the Vertical but we do not change Elco - Elco was then within weeks it will be damaged TV back. 

• B. Oval Picture> 

damage in his Ohm resistor size Changed Sized Specifically Kilo Ohm Resistor

• C. Picture shortened> 

Damage is usually at Elco Oscillator / Elco Measuring Input The 1micro s / d  2.2micro.
Tips> Vertical Block can also cause TV Star If you can not block the vertical is working optimally.up here will be my first reconnect ......... >>>>>>