TRICK REPAIR TELEVISION BLOCK VERTICAL

VERTIKAL

Vertical sequence is a series that serves to pull the image up and down.

The main components of this circuit are:

1. IC include: TDA 1675, TDA 4866, TDA 8132, TDA 9302, STV 9302, etc.
2. Elco: elco this functionality to the regulator / filter voltage.

How to Work Series Vertical:

The source of this vertical circuit voltage is mainly voltage power supply and 12v-12v. But this is not necessarily, because each monitor has a voltage characteristic which is different.
Vertical input obtained from the vertical syncrone VGA cable that goes into a series of syncronisasi and forwarded to the vertical IC. In IC this is all setting up and strengthening of the signal was performed with Elco as a filter voltage. If Elco are damaged then the vertical will not work correctly, eg rolling images, etc.. Vertical block this output is also produced by the vertical IC is then feed into the Yoke VERTICAL. This vertical output circuit if the voltage measured around 40-10 VAC. So the AC voltage.